- Mon-Sat : 9.30 AM - 6.00 PM
Pune, Maharashtra
Talegaon Kanhe - 412106
Contact Us
(+91) 86056 17733
Email Us
calistochemicals@gmail.com
Waterproofing
- Home
- Products
- Waterproofing
Calisto Roof Coat is available in 1 kg, 5 kg, 10 kg, 20 kg, 200 kg
Shelf life is 12 months in unopened container. Store away from sunlight and preferably below 30oC.
Description :
Calisto Roof Coat is a specially designed single part, pollution free liquid waterproofing membrane coating based on special synthetic resin. Its excellent flexibility & thixotropic nature makes it ideal for use on both horizontal & vertical surfaces. It offers superior UV resistance and solar reflectivity.
Features:
- Seamless, tough , flexible elastic coating
- Light weight than conventional roofing
- Can be used as waterproof primer
- Superior wetting & adhesion properties
- Solar Reflective Coating
- Highly resistant to oxidation, UV & ozone. Lasts longer
- Ensures durable bond to most building material (old or new)
- Provides insulation or cooling effect up to certain extent.
Areas of Application
- All types of roofing systems
- External wall
- Terraces
- Parapet walls
- Joint treatments
- B B coba
- Chajjas etc
* This coating system is recommended to keep
in exposed condition.
Prime the prepared surface with Calisto Roof Coat diluted with water in the ratio of 1:1. Post drying of primer, apply 1st & succeeding coats. One can use standard roofing brooms, brushes, squeegees or airless spray equipment for application. Allow full curing of each coat (approx 8 – 10 hours) before applying next coat. Reinforcing with Geotextile fleece/ LDPE net/glass fiber mesh will yield better results. Reinforcement is to be embedded into 1st Coat while it is still wet. *Top of the parapet walls, terraces with area more than 500sq ft, joints/ junctions of horizontal and vertical surfaces, j-bolts etc. are recommended to be treated with reinforcement (Geotextile fleece/ LDPE net/glass fiber mesh)
Surface should be clean free from dirt, gravel, dust and oil. The surface should be dry and smooth. Repair the roof of all blisters, cracks, split seams and flashing before coating.
Primer coat: Approximate coverage for primer coat is around 40-50 sq. ft / kg depending on surface porosities.
Coating/ upper coats: Coverage for 2 coats is around 25- 30 sqft /kg and should generally return DFT of approx 200-300 microns. For higher DFT use extra coats. And coverage for coating with reinforcement (Geotextile fleece/ LDPE net/glass fiber mesh) is around 10 -12 sq ft/kg. And it should return the DFT of 400-600 microns.
Exercise caution and use protective clothing such as gloves and goggles. Inhalation of vapour or mist should be avoided. If inhaled symptoms include coughing, wheezing, laryngitis, and shortness of breath, headache, nausea, and vomiting. Immediately shift victim to fresh air & if need be start artificial respiration. Give oxygen if breathing is labored & call emergency medical help. In case of eye contact flush with water for 15 minutes and call for medical help. If swallowed will cause nausea, vomiting, and loss of consciousness. Do not induce vomiting rather call for medical help. If contact with skin flush with water/soap & water until all traces are removed. Seek medical attention if required.
Calisto Colour Coat is available in 5 kg, 10 kg, 20 kg, 200 kg
Shelf life is 12 months in unopened container.
Store away from sunlight and preferably below 30oC.
Description :
Calisto Colour Coat is a specially designed single part, pollution free liquid waterproofing membrane coating in customized colour shades based on special synthetic resin and added pigments. Its excellent flexibility & thixotropic nature makes it ideal for use on both horizontal & vertical surfaces. It offers superior UV resistance and solar reflectivity.
Features:
- Seamless, tough , flexible elastic coating
- Unique additives added to make it durable
- Superior wetting & adhesion properties
- Highly resistant to oxidation, UV & ozone. Lasts longer
- Ensures durable bond to most building material(old or new)
- Available in custom colours, Adds to aesthetic look
- Can be used as waterproof external paint.
- Makes the surface Algae and fungus free
Areas of Application
- All types of roofing systems
- External wall (old/new)
- Terraces
- Parapet walls
- Joint treatments
- B B coba
- Chajjas etc
* This coating system is recommended to keep
in exposed condition.
Prime the prepared surface with ‘Calisto Colour Coat’ water diluted in the ratio of 1:1. Post drying of primer, apply 1st & succeeding coats. One can use standard roofing brooms, brushes, rollers, squeegees or airless spray equipment for application. Allow full curing of each coat (approx 8 – 10 hours) before applying next coat. Reinforcing with Fibre Mesh/ Geotextile fleece will yield better results. Reinforcement is to be embedded into 1st Coat while it is still wet. *Top of the parapet walls, terraces with area more than 500sq ft, joints/ junctions of horizontal and vertical surfaces, j-bolts etc. are recommended to be treated with reinforcement (Geotextile fleece/ LDPE net/glass fiber mesh)
Surface should be clean free from dirt, gravel, dust and oil. The surface should be dry and smooth. Repair the roof of all blisters, cracks, split seams and flashing before coating.
Primer coat: Primer coat: Approximate coverage for primer coat is around 40-50 sq. ft / kg depending on surface porosities.
Coating/ upper coats: Coating/ upper coats: Coverage for 2 coats is around 25- 30 sqft /kg and should generally return DFT of approx 200-300 microns. For higher DFT use extra coats. And coverage for coating with reinforcement (Geotextile fleece/ LDPE net/glass fiber mesh) is around 10 -12 sq ft/kg. And it should return the DFT of 400-600 microns.
Exercise caution and use protective clothing such as gloves and goggles. Inhalation of vapour or mist should be avoided. If inhaled symptoms include coughing, wheezing, laryngitis, and shortness of breath, headache, nausea, and vomiting. Immediately shift victim to fresh air & if need be start artificial respiration. Give oxygen if breathing is labored & call emergency medical help. In case of eye contact flush with water for 15 minutes and call for medical help. If swallowed will cause nausea, vomiting, and
loss of consciousness. Do not induce vomiting rather call for medical help. If contact with skin flush with water/soap & water until all traces are removed. Seek medical attention if required.
Calisto PU Coat is available in 1 kg, 5 kg, 10 kg, 20 kg, 200 kg
Shelf life is 12 months in unopened container. Store away from sunlight and preferably below 30oC.
Description :
Calisto PU Coat is Water based High Performance, and Polyurethane Modified UV stable, cold applied flexible liquid waterproofing membrane. Its eco-friendly unique formula makes it a proven & durable solution for weather proofing, waterproofing applications. PU COAT cures to a permanently flexible seamless membrane with excellent adhesion to a wide range of substrates. Unlike traditional bitumen based products it does not embrittle upon ageing or on exposure to ultra violet radiation or weathering. Being flexible, PU COAT does not crack or get affected by variations in temperatures.
Features:
- Single component, cold applied water based
- Superior wetting & adhesion properties
- Adapts itself over the irregular contours of the deck
- Withstands expansion/contraction & deck movements. Does not crack.
- Easy clean up possible
- Fast Drying & UV Stable non yellowing
- Ensures durable bond & Compatible with Most of the surfaces
- Forms a impervious & waterproof blanket with crack bridging properties
Areas of Application
- All types of roofing systems
- New as well as old terraces
- External wall (old/new)
- Parapet walls
- Wall and metal roof joints
- Junction of vertical and horizontal surface.
- B B coba
- Chajjas etc
* This coating system is recommended to keep in exposed condition.
Prime the prepared surface with Neoproof Multicoat diluted with water in the ratio of 1:3. Post drying of primer; apply 1st & succeeding coats of ‘PU coat’. One can use standard roofing brooms, brushes, squeegees or airless spray equipment for application. Allow full curing of each coat (approx 8 – 10 hours) before applying next coat. Reinforcing with Geotextile fleece/ LDPE net/glass fiber mesh will yield better results. Reinforcement is to be embedded into 1st Coat while it is still wet. *Top of the parapet walls, terraces with area more than 500sq ft, joints/ junctions of horizontal and vertical surfaces, j-bolts etc. are recommended to be treated with reinforcement (Geotextile fleece/ LDPE net/glass fiber mesh)
Surface should be clean free from dirt, gravel, dust and oil. The surface should be dry and smooth. Repair the roof of all blisters, cracks, split seams and flashing before coating.
Coverage for 2 coats is around 25- 30 sqft /kg and should generally return DFT of approx 200-300 microns. For higher DFT use extra coats. And coverage for coating with reinforcement (Geotextile fleece/ LDPE net/glass fiber mesh) is around 10 -12 sq ft/kg. And it should return the DFT of 400-600 microns.
Exercise caution and use protective clothing such as gloves and goggles. Inhalation of vapour or mist should be avoided. If inhaled symptoms include coughing, wheezing, laryngitis, and shortness of breath, headache, nausea, and vomiting. Immediately shift victim to fresh air & if need be start artificial respiration. Give oxygen if breathing is labored & call emergency medical help. In case of eye contact flush with water for 15 minutes and call for medical help. If swallowed will cause nausea, vomiting, and loss of consciousness. Do not induce vomiting rather call for medical help. If contact with skin flush with water/soap & water until all traces are removed. Seek medical attention if required.
Calisto Rubber Coat is available in 1 kg, 5 kg, 10 kg, 20 kg, 200 kg
Shelf life is 12 months in unopened container. Store away from sunlight and preferably below 30oC.
Description :
Calisto Rubber Coat is a specially designed cold applied liquid waterproofing membrane produced
from a blend of special resin/rubber, reinforced with special water repelling fillers, mineral stabilizer & gelling agent. Its unique formula makes it more durable & lasts longer.
Features:
- Highly Elastic, cures to form a rubber like membrane
- Single component, cold applied
- Superior wetting & adhesion properties
- Withstands expansion/contraction & deck movements. Does not crack
- Requires no mixing or heating, saves labour costs
- Ensures durable bond & resists peeling, chipping, hence lasts longer
- Forms an impervious & waterproof blanket on the surface.
Areas of Application
- RCC wall in Basements
- Retaining walls of watertanks
- Sunken slabs in toilet and bathrooms
- Podium slabs
- Terraces/ gardens
- Balconies
- Before construction of B B coba
- Core cut joints
- Metal surfaces etc
* This coating system is recommended to be used as sandwich membrane and direct contact of this membrane with weather is not advocated
Prime the prepared surface with Calisto Rubber Coat with water dilution in the ratio of 1:1. Post drying of primer, apply 1st & succeeding coats. One can use standard roofing brooms, squeegees, brushes or airless spray equipment for application. Allow full curing of each coat (approx 8 – 10 hours) before applying next coat. Reinforcing with Geotextile fleece/ LDPE net/glass fiber mesh will yield better results (Areas like podium slab, basements, terraces of area more than 500 sqft, core cut joints, junction between horizontal and vertical surfaces etc are specifically to be treated with reinforcement). Reinforcement is to be embedded into 1st Coat while it is still wet. Ensure complete curing (approx 48 -72 hours) before laying thermal insulation/mechanical protection.
Surface should be clean free of dirt, gravel, dust and oil. The concrete surface should be dry and smooth. Repair the roof of all blisters, cracks, split seams and flashing before coating.
Primer coat: Approximate coverage for primer coat is around 40-50 sq. ft / kg depending on surface porosities.
Coating/ upper coats: Coverage for 2 coats is around 25- 30 sqft /kg and should generally return DFT of approx 200-300 microns. For higher DFT use extra coats. And coverage for coating with reinforcement (Geotextile fleece/ LDPE net/glass fiber mesh) is around 10 -12 sq ft/kg. And it should return the DFT of 400-600 microns.
Exercise caution and use protective clothing such as gloves and goggles. Inhalation of vapour or mist should be avoided. If inhaled symptoms include coughing, wheezing, laryngitis, and shortness of breath, headache, nausea, and vomiting. Immediately shift victim to fresh air & if need be start artificial respiration. Give oxygen if breathing is labored & call emergency medical help. In case of eye contact flush with water for 15 minutes and call for medical help. If swallowed will cause nausea, vomiting, and loss of consciousness. Do not induce vomiting rather call for medical help. If contact with skin flush with water/soap & water until all traces are removed. Seek medical attention if required.
Calisto Multiprime is available in 1 kg, 5 kg, 10 kg, 20 kg, 200 kg
Shelf life is 12 months in unopened container. Store away from sunlight and preferably below 30oC.
Description :
Calisto Multiprime is a one part modified acrylic polymer based coating along with liquid additives. Finds use as a penetrating waterproof compound for terraces, balconies and roof slabs. It accommodates limited crack movement in underlying surfaces. It bonds excellently to most building materials thus becoming a part of concrete repair. Mixed with cement it can also be used as acrylic modified semi-flexible cementitious coating.
Features:
- Highly Durable Polymer Coating
- Single component, Easy to apply
- High penetration
- Excellent adhesion to cementitious substrates
- Used as waterproof Primer
- Acrylic modified semi-flexible cementitious coating
- Resists Salt action on Concrete
- After curing it becomes transparent as such taking the colour of the surface coated
Areas of Application
- New RCC sunk slabs
- Sunken slabs of old toilet/bathroom
- Terraces (old/new)
- Balconies
- Before construction of B B coba
- External wall
- Swimming pools etc
Primer coat: This coating is to be used as a ‘Primer coat’ before any other type of coating/ waterproofing system. Prime the prepared surface with single coat of ‘CALISTO MULTYPRIME’ diluted with water in the ratio of 1:3.
Cementitious coating: Post drying of primer, apply 1st & succeeding coats by mixing with water & cement in the ratio of 1:2:4 or 5. Allow full curing of each coat (approx 8 – 10 hours) before applying next coat. (Recommended to be kept in submerged condition.)
Top coat over any cementitious coating: This coating will act as a repellent, when applied as a top coat after any cementitious coating (which will increase the effectiveness of cementitious coating and it will make cementitious coating more durable). Apply single coat of ‘CALISTO MULTY COAT’ diluted with water in the ratio of 1:3.
Surface should be clean free of dirt, gravel, dust and oil. The concrete surface should be dry and smooth. Repair the roof of all blisters, cracks, split seams and flashing before coating.
Primer coat/ top coat: Approximate coverage for primer coat is around 100-110 sq ft/kg depending on surface porosities.
Cementitious coating: Coverage for cementitious coating is around 20-25 sq ft/kg depending on the surface porosities.
Exercise caution and use protective clothing such as gloves and goggles. Inhalation of vapour or mist should be avoided. If inhaled symptoms include coughing, wheezing, laryngitis, and shortness of breath, headache, nausea, and vomiting. Immediately shift victim to fresh air & if need be start artificial respiration. Give oxygen if breathing is labored & call emergency medical help. In case of eye contact flush with water for 15 minutes and call for medical help. If swallowed will cause nausea, vomiting, and loss of consciousness. Do not induce vomiting rather call for medical help. If contact with skin flush with water/soap & water until all traces are removed. Seek medical attention if required.
Calisto Sun Coat is available in 5 kg, 10 kg, 20 kg, 200 kg
Shelf life is 9 months in unopened container. Store
strictly away from sunlight and preferably below 30oC
Description :
Calisto Sun Coat is a specially designed single part, pollution free liquid heat reflecting roof Insulation & waterproofing coating based on special synthetic resin. Its excellent flexibility & thixotropic nature makes it ideal for use on both horizontal & vertical surfaces. It offers superior UV resistance and high solar reflectivity. Gives cooling effect to interiors and as such reduces energy consumption required for air conditioning. Sun Coat coating helps achieving reduction of 16-18 °C in surface temperature and 8 – 10 °C in interior temperature.
Features:
- Imparts improved bond / impact strength
- Increases mortar flexural / tensile strength
- Highly durable in continuous wet condition/ Effective in immersed applications
- Not affected by UV light or by chemicals
- Reduces salt penetration into concrete/ Durable & prevents concrete decay
- Excellent adhesion to most building substrates
- Increases overall structural durability
Areas of Application
- Roofs & Terrace
- Aluminium Sheet Roofs
- Weather resistant membrane
- Corrosion Under Insulation (CUI)
- Walking decks & balconies
- Air-Conditioned Building
- Stair ways & pool area
- Sheds & Warehouses
- Refrigerated Cold storage Facilities
- Asbestos roofs
- Mobile Modular Homes
- Green Buildings etc
Prime the prepared surface with Calisto Sun Coat water diluted in the ratio of 1:1. Post drying of primer, apply 1st & succeeding coats with dilution ratio 1:0.2 or 1:0.3. One can use standard roofing brooms, brushes, squeegees or airless spray equipment for application. Allow full curing of each coat (approx 8 – 10 hours) before applying next coat. For best results, apply when surface and ambient temperatures are above 13°C and below 40°C. Since product works on reflectivity & insulating mature of material, full effectiveness is possible when the coated surface is maintained properly. We advise periodical cleaning to retain the whiteness of coating. Recoating is also possible if desired by customer. Recoating interval: single coat every 3 years.
Surface should be clean free from dirt, gravel, dust and oil. The surface should be dry and smooth. Repair the roof of all blisters, cracks, split seams and flashing before coating. Wood panels or metal sheeting should be solidly fixed and cleaned. Bio-wash for killing fungus where ever necessary.
Approximate coverage is around 25-30 sq. ft per kg/coat. 2 coats of application should generally return DFT of approx 200-300 microns. For best results apply additional coats to get minimum of 800-1000 microns
Exercise caution and use protective clothing such as gloves and goggles. Inhalation of vapour or mist should be avoided. If inhaled symptoms include coughing, wheezing, laryngitis, and shortness of breath, headache, nausea, and vomiting. Immediately shift victim to fresh air & if need be start artificial respiration. Give oxygen if breathing is labored & call emergency medical help. In case of eye contact flush with water for 15 minutes and call for medical help. If swallowed will cause nausea, vomiting, and loss of consciousness. Do not induce vomiting rather call for medical help. If contact with skin flush with water/soap & water until all traces are removed. Seek medical attention if required.
Calisto Shield Coat is available in 1 kg, 5 kg, 10 kg, 20 kg, 25 kg
Shelf life is 14 months in unopened container. Store away from sunlight and preferably below 30oC
Description :
Calisto Shield Coat is a Modified Acrylic Polymer based system, specifically designed for modified Portland cement compositions. Mortar modified with ‘Calisto Shield Coat’ has improved physical strength, and superior adhesion to old concrete, masonry, brick, and many other surfaces. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers. The product upon coating gives a tough, hard-wearing surface with waterproofing. Product however allows trapped vapours to escape thus preventing peeling and blister formation.
Features:
- Imparts improved bond / impact strength
- Increases mortar flexural / tensile strength
- Highly durable in continuous wet condition/ Effective in immersed applications
- Not affected by UV light or by chemicals
- Reduces salt penetration into concrete/ Durable & prevents concrete decay
- Excellent adhesion to most building substrates
- Increases overall structural durability
Areas of Application
- Use as a bonding aid for structural repair rendering & profiling of vertical, horizontal & overhead applications
- Suitable for use for surface treatment protecting, waterproofing and repairing concrete and masonry
- General concrete repairs
- Cementitious waterproofing coating
To repair depressions/ wide cracks on the surface: Mix 1 kg cement with 1.5 kg silica sand and 0.5 kg ‘Calisto Shield coat’ and level the surface with standard procedure.
To be used as coating: ‘Calisto shield coat’ is to be mixed with neat cement in the ratio of 1:2. The mix has to be stirred thoroughly so that no air bubbles / lumps remain in the mix. Apply the mix by brush on rendered and/or prepared surface. Two or more coats are recommended. First coat should be allowed to dry for 5-6 hours. The surface should be made wet before application in case of porous structures.
To be used as bond coat: Clean & wet surface 24 hrs before application. Mix Calisto Shield Coat & Cement 1:1 by volume. Apply single coat & place the mortar while the coat is still wet.
Surface preparation: Remove all dust, foreign matters, loose materials or any deposits of contamination which could affect the bond between the surface and the Coating by scarifying, grinding, water blasting, sand blasting, acid washing or by any other approved method. New flat surfaces shall be made reasonably smooth so as not to affect the application of Coating and to avoid sharp projections. Treat the depressions, cracks or damaged surface before coating. Pre wet the concrete surfaces at least one hour prior to the application.
Coverage: Approximate coverage for 1 coat ranges between 35-40 Sqft / kg depending on the substrates.
Exercise caution and use protective clothing such as gloves and goggles. Inhalation of vapour or mist should be avoided. If inhaled symptoms include coughing, wheezing, laryngitis, and shortness of breath, headache, nausea, and vomiting. Immediately shift victim to fresh air & if need be start artificial respiration. Give oxygen if breathing is labored & call emergency medical help. In case of eye contact flush with water for 15 minutes and call for medical help. If swallowed will cause nausea, vomiting, and
loss of consciousness. Do not induce vomiting rather call for medical help. If contact with skin flush with water/soap & water until all traces are removed. Seek medical attention if required.
‘Calisto Guard’ is available in 10 Kg (8kg Powder + 2Kg Liquid)
Shelf life is 12 months in unopened container. Store away from sunlight and preferably below 30oC
Description :
Calisto Guard is a two component cementitious and acrylic polymer based semi-flexible
waterproofing and protective coating made up from the best quality Portland cement, properly selected and graded aggregates additives, fiber & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and similar structures.
Features:
- Seamless, tough , semi-flexible coating
- Superior adhesion properties
- Ensures durable bond to most building material (old or new)
- Membrane of 1 to 1.5mm provides an excellent shield against the penetration of carbon dioxide and chloride ions
- Excellent resistance to ingress of water
Areas of Application
- Toilet/Bathroom
- Swimming pool
- Waterproofing under B B Coba
- Waterproofing under tiles etc
- Attached balconies
- Terraces
- Watertanks etc
To repair depressions/ wide cracks on the surface: Mix 1 kg cement with 1.5 kg silica sand and 0.5 kg ‘Calisto Shield coat’ and level the surface with standard procedure.
To be used as coating: ‘Calisto shield coat’ is to be mixed with neat cement in the ratio of 1:2. The mix has to be stirred thoroughly so that no air bubbles / lumps remain in the mix. Apply the mix by brush on rendered and/or prepared surface. Two or more coats are recommended. First coat should be allowed to dry for 5-6 hours. The surface should be made wet before application in case of porous structures.
To be used as bond coat: Clean & wet surface 24 hrs before application. Mix Calisto shield coat & Cement 1:1 by volume. Apply single coat & place the mortar while the coat is still wet.
Surface preparation: Remove all dust, foreign matters, loose materials or any deposits of contamination which could affect the bond between the surface and the Coating by scarifying, grinding, water blasting, sand blasting, acid washing or by any other approved method. New flat surfaces shall be made reasonably smooth so as not to affect the application of Coating and to avoid sharp projections. Treat the depressions, cracks or damaged surface before coating. Pre wet the concrete surfaces at least one hour prior to the application.
Coverage: Approximate coverage for 1 coat ranges between 35-40 Sqft / kg depending on the substrates.
Exercise caution and use protective clothing such as gloves and goggles. Inhalation of vapour or mist should be avoided. If inhaled symptoms include coughing, wheezing, laryngitis, and shortness of breath, headache, nausea, and vomiting. Immediately shift victim to fresh air & if need be start artificial respiration. Give oxygen if breathing is labored & call emergency medical help. In case of eye contact flush with water for 15 minutes and call for medical help. If swallowed will cause nausea, vomiting, and
loss of consciousness. Do not induce vomiting rather call for medical help. If contact with skin flush with water/soap & water until all traces are removed. Seek medical attention if required.
1kg, 5 kgs, 30 kgs. net in, plastic cans and HDPE car buoys
Description :
Calisto Rust Convertor (CRC) is a high performance co-ordinator polymer, water based for conversion of rust and then protection of metal from rusting. In fact it is a convertor and protector. Rust Convertor constituents work in two aspects. In the first aspect, on application of the product to the surface of iron, the rust is converted into an organometallic complex and gets passivated In the second aspect an elastomeric Co-polymer with cross-linking compounds form a film which is impermeabile to air moisture. These two aspects stop the process of rusting of iron by converting and protecting Depending upon the degree of rusting of the iron surface, on application of the product, the resultant product gives rise to Black, or Grey film with iron lower oxide and Brown film with Iron higher oxide. In the first stage the product gives conversion and in the last stages the product gives protection and stability against corrosion
Grades
Rust Convertor: (Commercial Grade) – CRC (C) low corrosion areas, deformed bas in construction
Rust Convertor: (Industrial Grade) – CRC ( I ) moderate resistance, industrial fabrication
Rust Convertor: (Marine Grade) – CRC (M) heavy corrosion resistance, coastal areas
Edge Over International Products
- All market rust convertors are acidic pH2,whereas CRC is neutral pH 6to 7. This has a great advantage since neutral pH will not support rusting
- All market rust convertors' shelf life is only 1 year, whereas CRC shell life is in excess of 3 years. This is also due to neutral pH
- All market rust convertors are free flowing, where as CRC is thicksotropic, that is on application of pressure it thins otherwise it is thick greatest advantage is that CRC does not separate on storage, so no need to stir before use. Secondly CRC does not leak from the container. Thirdly CRC does not spurt on application.
All market rust convertors use synthetic anti-oxidants, whereas CRC uses natural antioxidant which is eco-friendly
A wire brush is used to remove the loose and flaky rust from the surface of iron. this process is carried out effectively then most of the forth and fifth stages Le. oxides will be removed. It is very necessary that the intermediatory stage that is hydroxide should remain on the surface for chemical reaction with the product to give excellent bonding. The product should not be used on smooth non-rusted, milscale, oily and greasy Surface
Automobile Industry, locomotives and Railways, Shipping Industry, steel plants, industrial Fabrications, Chemical Plants and Structures, Soap Detergent Industry, Metal Fabrication like Cupboards Tables, Chairs, Fans Refrigerators, Air conditioners and other electrical product. Building Constructions-RCC Structure Water Proofing, Advertisements Hoardings. ONGC installation of Petroleum and Petro chemical industries, Port and Docks, Bridges and Dams practically all types of industries where the problem of rusting of iron is present
A simple surface preparation is carried out by removing as far as possible the flaky and loose rust, old paint by the use of a wire brush. The loose particles on the surface are then removed by the compressed air or water wash This is important because any loose particle on the surface is poison to adhesion. Grease and oil are removed by a detergent wash followed by a water wash. Do not remove all traces of rust since it can be converted. In CRC application transfer a small portion from the original container. This will prevent contamination of the product CRC is an under coat and accepts all types of Top Coats like enamel epoxy polyurethane, polyester etc
Calisto Roof Coat is a specially designed single part, pollution free liquid waterproofing membrane coating based on special synthetic resin. Its excellent flexibility & thixotropic nature makes it ideal for use on both horizontal & vertical surfaces. It offers superior UV resistance and solar reflectivity.
Calisto Colour Coat is a specially designed single part, pollution free liquid waterproofing membrane coating in customized colour shades based on special synthetic resin and added pigments. Its excellent flexibility & thixotropic nature makes it ideal for use on both horizontal & vertical surfaces. It offers superior UV resistance and solar reflectivity.
Calisto PU Coat is Water based High Performance, and Polyurethane Modified UV stable, cold applied flexible liquid waterproofing membrane. Its eco-friendly unique formula makes it a proven & durable solution for weather proofing, waterproofing applications. PU COAT cures to a permanently flexible seamless membrane with excellent adhesion to a wide range of substrates. Unlike traditional bitumen based products it does not embrittle upon ageing or on exposure to ultra violet radiation or weathering. Being flexible, PU COAT does not crack or get affected by variations in temperatures.
Calisto Rubber Coat is a specially designed cold applied liquid waterproofing membrane produced from a blend of special resin/rubber, reinforced with special water repelling fillers, mineral stabilizer & gelling agent. Its unique formula makes it more durable & lasts longer.
Calisto Multiprime is a one part modified acrylic polymer based coating along with liquid additives. Finds use as a penetrating waterproof compound for terraces, balconies and roof slabs. It accommodates limited crack movement in underlying surfaces. It bonds excellently to most building materials thus becoming a part of concrete repair. Mixed with cement it can also be used as acrylic modified semi-flexible cementitious coating.
Calisto Sun Coat is a specially designed single part, pollution free liquid heat reflecting roof Insulation & waterproofing coating based on special synthetic resin. Its excellent flexibility & thixotropic nature makes it ideal for use on both horizontal & vertical surfaces. It offers superior UV resistance and high solar reflectivity. Gives cooling effect to interiors and as such reduces energy consumption required for air conditioning. Sun Coat coating helps achieving reduction of 16-18 °C in surface temperature and 8 – 10 °C in interior temperature.
Calisto Shield Coat is a Modified Acrylic Polymer based system, specifically designed for modified Portland cement compositions. Mortar modified with ‘Calisto Shield Coat’ has improved physical strength, and superior adhesion to old concrete, masonry, brick, and many other surfaces. The dispersion contains an anionic emulsifier system and is free from film forming aids, solvents and plasticizers. The product upon coating gives a tough, hard-wearing surface with waterproofing. Product however allows trapped vapours to escape thus preventing peeling and blister formation.
Calisto Guard is a two component cementitious and acrylic polymer based semi-flexible
waterproofing and protective coating made up from the best quality Portland cement, properly selected and graded aggregates additives, fiber & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and similar structures.
Calisto Rust Convertor (CRC) is a high performance co-ordinator polymer, water based for conversion of rust and then protection of metal from rusting. In fact it is a convertor and protector. Rust Convertor constituents work in two aspects. In the first aspect, on application of the product to the surface of iron, the rust is converted into an organometallic complex and gets passivated In the second aspect an elastomeric Co-polymer with cross-linking compounds form a film which is impermeabile to air moisture. These two aspects stop the process of rusting of iron by converting and protecting Depending upon the degree of rusting of the iron surface, on application of the product, the resultant product gives rise to Black, or Grey film with iron lower oxide and Brown film with Iron higher oxide. In the first stage the product gives conversion and in the last stages the product gives protection and stability against corrosion
Phone
(+91) 86056 17733
(+91) 98224 03250
calistochemicals@gmail.com
inquiry@calistochemicals.com
Location
A9/201, Eco Valley, Kanhe Mumbai Pune Highway, Kanhe, Pune, Maharashtra, 412106
@ Calisto Chemicals
Partner with us and experience the difference of customer-centric support that elevates your business to new heights.
Quick Links
Quick Links
Copyright © Calisto Chemicals 2023. All Right Reserved.
Crafted by Makeovers Digital