1.Mix Unique Tile Adhesive with cool and clean tap water and stir properly for 4 to 5 minute by hand or an electric stirrer to get a smooth and homogeneous mixture

2.After stirring wait for 5 minutes, stir once again and apply the adhesive on the sub floor with the recommended adhesive notch trowel

3.Press the tiles within 15 to 20 minutes with a shuffling movement in to the adhesive. Check regularly to ensure that the back of the tile is in full contact with the adhesive.

4.Remove excess adhesive immediately from the joints

5.The proper preparation of the surface will make the fixing easier and quicker ensuring a better finish.

6.New concrete is recommended to be 1 month old for every 25mm thickness and completely dried before tiling

7.Under normal circumstances, i.e. a temperature of 20°C and a relative humidity of 65%, the joints may be filled after minimum 24 hours 8.Fill tile joints after 24 hours of tile laying.